Difference: When installed on the door, the mother-child hinge does not need slotting, just nail it to the door, while the ordinary hinge must be in the door.
Side grooving inserts one edge of the hinge inside the groove. The advantage of mother-child hinge is easy to install, the disadvantage is that the force is not flat, and the advantage of flat is that the force is good, after all, the force on both sides of the trench is symmetrical.
Ordinary hinge
Used for cabinet doors, windows, doors, etc. The materials are iron, copper and stainless steel. Ordinary hinge does not have the function of spring button.
All kinds of beads must be fitted after the binding, otherwise the wind will blow the door panels.
Child hinge
It is a kind of hinge which is installed on the indoor door. The mother-child hinge is a kind of meteorological appellation. At that time, it is called cloud-cloud because the outer organization of the hinge consists of two parts in the surface, just like the mother-child, which is very meteorological, so it is called the mother-child hinge.
Good or bad
1. In terms of durability, a flat hinge is better than a child-parent hinge, because the length of the child-parent hinge is the same as that of the common hinge.
However, the inner and outer pages of the factor master page should be overlapped to make the inner pages shrink while the outer pages are hollowed out.
2. From this point of view, durability must not be comparable to the open hinges with two complete pages, plus the rolling and bearing of the hinges.
The wear resistance of the central ring and the closure of the central axis simply determine the bearing capacity of the hinge, which is usually flat.
All of them are 4 rings, and the mother and child are two rings. From this point of view, it is also the reason why the durability of the mother and child hinge is worse than that of the flat hinge.
3. From the convenience of application and the adaptability to the door, the mother-child hinge undoubtedly occupies the overall advantage and the biggest selling point of the mother-child hinge.
That is to say, the application is convenient, because it is relative to the installation of flat hinge, without slotting, it simply reduces the damage to the door and greatly enhances it.
Beautiful door.
4. More nervous, now some non-solid wood doors (composite materials) or hollow wooden doors, the foundation can not stand grooving, far-fetched open.
After a period of time, there may be tension quality problems, such as the scattering of doors and the perforation of doors and fans.
The bizarre plan of the page, without slotting and installation, enhances the integrity of the door, and greatly enhances the hinges for various types of inner doors.
Applicability.
Key Points for Attention in Installation of Hoop Pages
1. Before installation, check whether the combination page matches well with doors, windows, frames and fans.
2. Search and check whether the folder slot matches the height, width and thickness of the folder.
3. Search and check whether the folder matches its continuous screw and fastener.
4. The durability of the knob should match the material of the frame and the fan, such as the hinge used for the steel frame wooden door, and the continuous side of the steel frame should be welded.
Then, the wood screw is fixed on the continuous side of the wooden door fan.
5. Under the circumstance of the two sheets of the composite page being negligently balanced, it should be distinguished which sheet should be connected with the fan and which sheet should be connected with the door and window frames.
Connecting, the side connected with the three sections of the shaft shall be fixed with the frame, and the side connected with the two sections of the shaft shall be fixed with the doors and windows. When installing, the same shall be guaranteed.
The axis of the hinge on one fan is on the same vertical line, which saves the window and door from warping.
Difference: When installed on the door, the mother-child hinge does not need slotting, just nail it to the door, while the ordinary hinge must be in the door.
Side grooving inserts one edge of the hinge inside the groove.
The advantage of mother-child hinge is easy to install, the disadvantage is that the force is not flat open, and the advantage of flat open is that the force is good, finished.
It is unexpectedly that the forces on both sides of the trench are symmetrical. Install the mother and child in three pieces and the common hinge in two pieces.
Ordinary hinge
Used for cabinet doors, windows, doors, etc. The materials are iron, copper and stainless steel. Ordinary hinge does not have the function of spring button.
All kinds of beads must be fitted after the binding, otherwise the wind will blow the door panels.
Child hinge
It is a kind of hinge which is installed on the indoor door. The mother-child folder is a kind of meteorological appellation. At that time, it was called cloud-cloud because of this.
The outer organization of a kind of hinge consists of two pieces in the table, just like the mother and son, which is very meteorological, so it is called the mother and son hinge.
Good or bad
1. In terms of durability, a flat hinge is better than a child-parent hinge, because the length of the child-parent hinge is the same as that of the common hinge.
However, the inner and outer pages of the factor master page should be overlapped to make the inner pages shrink while the outer pages are hollowed out.
2. From this point of view, durability must not be comparable to the open hinges with two complete pages, plus the rolling and bearing of the hinges.
The wear resistance of the central ring and the closure of the central axis simply determine the bearing capacity of the hinge, which is usually flat.
All of them are 4 rings, and the mother and child are two rings. From this point of view, it is also the reason why the durability of the mother and child hinge is worse than that of the flat hinge.
3. From the convenience of application and the adaptability to the door, the mother-child hinge undoubtedly occupies the overall advantage and the biggest selling point of the mother-child hinge.
That is to say, the application is convenient, because it is relative to the installation of flat hinge, without slotting, it simply reduces the damage to the door and greatly enhances it.
Beautiful door.
4. More nervous, now some non-solid wood doors (composite materials) or hollow wooden doors, the foundation can not stand grooving, far-fetched open.
After a period of time, there may be tension quality problems, such as the scattering of doors and the perforation of doors and fans.
The bizarre plan of the page, without slotting and installation, enhances the integrity of the door, and greatly enhances the hinges for various types of inner doors.
Applicability.
Key Points for Attention in Installation of Hoop Pages
1. Pages and doors should be checked before installation.